Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Bailoy GTI-PC

Bailoy GTI-PC

  • For use on sites with 2- and 3-core control cables.
  • Suitable for retro fitting by utilising existing control cables.
  • 109/114 stations per control cable.
  • Up to 16 separate control cables (CSGs).
  • Built-in decoder programmer – programme, read and check decoders from DOU using GTI software.
  • Built-in pump start volt-free contact.
  • Rain switch input – turn off irrigation when there is too much rainfall.
  • Alarm sensor inputs – used to detect low system pressure and low tank level.
  • Built-in surge protection.
  • LED indicators for instant DOU status.
  • Compatible with all Bailoy manufactured Gemini and Watermation TW1 and TW2 decoders.
  • Available in multiple languages.
Produktnr: GTI-PC Kategori:

kr142000

Bailoy GTI PC

Product Brochure

FOR MEDIUM TO LARGE GOLF CLUBS AND SITES THAT REQUIRE GREATER CONTROL AND INTERACTION WITH THEIR IRRIGATION SYSTEM

Designed and manufactured by Bailoy, GTI-PC was one of the first Windows based PC systems in the irrigation industry. Ever since its introduction in 1995, the hardware and software powering their simple, yet comprehensive features, have been regularly updated increasing the functionality and compatibility with new technology.

HARDWARE OVERVIEW

Available in a 2 wire Gemini version or 3 wire Trident version, GTI-PC can have up to 4 DOU’s (Decoder Output Units) linked together with 4 control cable outputs (CSG’S) on each one. Each CSG can control up to 114 stations (109 on Gemini) allowing control of up to 1792 stations on Trident and 1744 on Gemini.

  • Gemini is ideal for replacing older controllers such as the Watermation TW1 and TW2 and in most cases can utilise existing field hardware.
  • Trident is an ideal replacement for the SC3000, CDS DIU. Both these controllers were designed and manufactured by Bailoy therefore can utilise all the existing field cables, decoders and solenoids.

GTI systems can also be used with most major manufacturers sprinklers allowing sites to choose the most economic or suitable types rather than being tied to one manufacturer if using their controller.

GTI-PC uses multiple CSG’s, which is better than single control cable systems as a damaged CSG would mean you only loose a small section of the system, not everything

SOFTWARE OVERVIEW

GTI-PC software is simple to use with guided steps for every process and no confusing spreadsheets or multiple windows. Once the database of site information has been setup, the user could be irrigating in just a few minutes.
The combination of hardware and software will provide the user with many features to set up and adjust irrigation run times quickly and easily and view data to diagnose any system issues giving precision-control of their irrigation on a daily basis.

  • For use on sites with 2-core control cables
  • Suitable for retro fitting by utilising existing control cables
  • 109 stations per control cable
  • Up to 16 separate control cables (CSGs)
  • Built-in decoder programmer – programme, read and check decoders from DOU using GTI software
  • Built-in pump start volt-free contact
  • Rain switch input – turn off irrigation when there is too much rainfall
  • Alarm sensor inputs – used to detect low system pressure and low tank level
  • Built-in surge protection
  • LED indicators for instant DOU status
  • Compatible with all Bailoy manufactured Gemini and Watermation TW1 and TW2 decoders
  • Available in multiple languages

 

  • For use on sites with 3-core control cables
  • Suitable for retro fitting by utilising existing control cables
  • 114 stations per control cable
  • Up to 16 separate control cables (CSGs)
  • Built-in decoder programmer – programme, read and check decoders from DOU using GTI software
  • Built-in volt-free pump start contact
  • Rain switch input – turn off irrigation when there is too much rainfall
  • Alarm sensor inputs – used to detect low system pressure and low tank level
  • Built-in surge protection
  • LED indicators for instant DOU status
  • Compatible with all Bailoy manufactured Trident, SC3000 and CDS decoders
  • Available in multiple languages